Since I love to make special personalized Christmas gifts, I thought all you dog lovers would love my DIY pet ornament project. It is very inexpensive, you can use your favorite photos, and this project takes no time at all. It took me about 3-4 minutes to make each personalized ornament. I also did a couple of memory ornaments for my two dogs Lexi and Bailey who passed away last year. These star ornaments are less then a dollar each at Michaels. They also have different shapes in the Christmas ornament section of Michael’s or you can Google “plastic star ornaments”. You can also find a 12 pack on Etsy for around $8 here. 

You can also get Juval Star Shaped Fillable Christmas star ornaments – pack of 20 on Amazon for $12.99. You can put the photo on the inside and also fill with other things like fake snow or glitter.

If you want more of an urban farm house vibe, consider using the Tin Standard Stars here (you will need to hot glue a ribbon on the top of them to hang but you can glue a photo to the middle of the star and use the Diamond Glaze to seal it.

Above: This year I put together a memory Angle wing display for Christmas with all the dogs we have lost over the past 20 years. I love this display! 


2015-12-05 10.40.13

2015-12-05 10.58.07

This project literally takes about 3-4 minutes per ornament. What you will need:

  • Clear plastic Star ornaments from Michaels. These run $1.99 each but are currently 60% off (I paid .79 cents each) and be sure to check their website for additional coupons and sales (or you can Google “clear plastic star ornaments” for other suppliers). Etsy has 12 clear stars for $8 here. 
  • White ornament ribbons (optional) – I did not like the ribbons on the star ornaments so I replaced them with white ribbon ornaments (less than $2 at Walmart)
  • 1 small bottle of Diamond Glaze
  • 1 roll of ribbon – I used some ribbon I had laying around but you could also do a lace ribbon just make sure it is wide enough to cover your image
  • A paint brush, scissors and a wet rag




2015-12-05 10.58.55

2015-12-05 10.35.54


To get started:

Find the images you want to use for each ornament. I put borders around each of my images so I had an easy guide to cut each photo. Export the photos you want to use into a file or on your desktop so you can find them all together in one file. Import them into a Word file and then make them small enough to fit on the back of the ornament. I held the ornament up to my computer screen to make sure the images where small enough to fit on the back of the ornament.


Select your images and add borders to them. Once you get all your images on your Word Doc. go ahead and print them out.

2015-12-05 10.36.14

Cut your images out and have them ready to glaze on the back of the star ornament.

2015-12-05 10.36.50

Flip the burlap ribbon over to the wrong side (so the lace is face down) and trace your image. Be very careful not to get ink on your image (turn you image over when you are tracing it so if you make a mistake with the pen you won’t be able to see your mistake).

2015-12-05 10.37.35

2015-12-05 10.54.21

Once your ribbon is cut be sure to hold it up to your image to make sure the ribbon doesn’t show behind your image once it is placed on top of your image. Trim very carefully if needed.

2015-12-05 10.37.54

Add a very small dot of Diamond Glaze to your star ornament.

2015-12-05 10.38.11

Take your paint brush and spread the glaze out in a circle.

2015-12-05 10.38.20

Put your image on top of the glaze right away.

2015-12-05 10.38.35

Be sure to press hard and get all the air bubbles out of your image by starting to press down in the middle and press all the air bubbles out to the edge of the photo and out the side. Use the palm of your hand to press down hard on the entire image once you think all the air bubbles are out from under your image.

2015-12-05 10.39.14

Next, put a dot of glaze on your photo and press the ribbon (good side up) on top of the back of the image and press down hard.

2015-12-05 10.49.49

Be sure to have a damp wash cloth handy with warm water on it to wipe and dry all the glaze residue off the back and front of your new ornament before it dries. If you wait to long you may have to use a blade in which case you will have to scrap the dried glaze off very carefully so you do not scratch the surface of your ornament – It is best to clean the glaze off before it dries in between each step.

2015-12-05 10.39.34

2015-12-05 10.51.21

After you have wiped the ornament down be sure to trim any loose strings on the edge of the photo/ribbon


2015-12-05 11.04.51

You can also make beautiful ornaments with cute children’s photos like the one above I made for my sister.

2015-12-05 10.58.07

These ornaments are sentimental and make wonderful personalized Holiday gifts!  You can easily mail them (because they look like glass but are plastic).  A great way to put an extra bit of love into your gift wrapping is to incorporate one of these beautiful ornaments on the outside of your wrapped package.


How much fun would it be to make beautiful dog ornaments for your local shelter dogs to put on the outside of their kennels to help get the shelter dogs adopted?

I hope you have time to make these fun ornaments and feel the joy in giving them to friends and loved ones.

Merry Christmas! Love you all …mean it!

~ Christina Lee – Deaf Dogs Rock